Lyneen's 2021 Class Kits Instructions

Friday, August 31, 2012

Creative Paperclay® Bird Nest & Eggs!

I love collecting little things... even more I love making shadow boxes with the little things.  Sometimes I can't find everything I would like to put in a shadow box, so I make them!  I wanted a birds nest and couldn't find one small enough.  My Creative Paperclay® BIRD NEST with EGGS is the focal point.  
Here is the finished nest! 
To make the nests I took Creative Paperclay® and made long skinny noodles. Then laid them in a circular nest shape. The noodles are very delicate and were not adhered to each other.  When they were dried I used Sakura Crystal Lacquer to hold them together.
With small amounts of Creative Paperclay® I rolled out very small eggs!  
Here is the nest and eggs in the center of the shadow box after they were painted with acrylic paint.  
In this box a frozen Charlotte made of Creative Paperclay® is holding one of the eggs! 
Here is one of the eggs balanced on a shoe from Monopoly sitting on a dollhouse chair.   
In the back is a Creative Paperclay® heart cut with a mini cookie cutter, painted with burgundy acrylic paint.  
Left over from a previous project the bird is made with Creative Paperclay® in a mold! 
Close-up of the top of the bird themed house.  
The finished house

Just think of the endless items you could create with Creative Paperclay® to add to your collection of little things to make a shadow box!

Tuesday, August 28, 2012

Steampunk Airship!

This month I had a great time creating the 
Steampunk Airship Kit!

  To make this I used the Steampunk Airship Kit, Piccolo Accents: from Floral Whimsy the swirls were used on the top and Vintage Gears Embellishments Set for the additional gears inside the the turn key in the front. Piccolo Enamel Powders and Piccolo Enamel Powder Adhesive and Glastique Gloss Finishing Gaze to glue the airship together.
Below is a picture of the kit... you may notice I have a lot more gears in my finished airship.

Pictured here is what is include in the kit!

All pieces were covered with Piccolo Enamel Powders and Piccolo Enamel Powder Adhesive.  Colors used were: Vintage Gold, Vintage Silver, Copper Kettle, Mermaid Tears and Glided Rose Gold. 

Before adding the bubble these pictures were taken.  
Here you can see the dimension of the gears.

To lift the gears I took the centers of some of the gears  in the Vintage Gears Embellishments Set and glued two to three together to lift a gear up.  Making sure the placement would not be hindered when the bubble frame was added. 

Here is a look at the other side... 

If you notice the exhaust on the back, the are left over pieces from some swirls I punched out for another project. I keep all the pieces... You never know when you may be able to use them on a project!!!

If you love Steampunk... 
this is a must have kit for you.


Monday, August 27, 2012

31 days has December

One of the Viva Las Vegastamps! August 2012 releases 
is the Number Plate 1430!  
Yes, 31 days has December...
also... January

The rest of the months are taken care of 
since they have less than 31 days!!!

Think of the fun you could have with the numbers!

Make calendars
Advent Calendar
Create lists of
Ten best

Countdown Days until

Use them in titles
Birthday cards
Anniversary cards
Pages for youngsters to count
Let your imagination go!

I use journals to try techniques and test my stamps.  On this page of my journal I was playing with texture and numbers to see when stamped what they looked like. I must say I am pleased with my number stamps! In addition to the numbers there is a set of lower case alphas. 

Starting with a white page in my Clairfontaine journal I sprayed it with Sandlewood LuminArte Shimmering Mist. With two sizes of Punchinello from Gauche Alchemy stencil the background.  Inks from right to left: ColorBox Fluid Chalk Burnt Sienna, CTMH Red Barn, Tim Holtz Distress Ink Barn Door and ColorBox Fluid Chalk Alabaster. 

On top of the stenciled backgroung randomly stamp the numbers to see how the look.  The journal paper had a little texture and a couple look better on smooth paper so I stamped them on ledger paper and adhered them to the journal page. 


The numbers are sold as PLATE 1430 only.  

Tuesday, August 21, 2012

Finished Paris Book

Finally my finished Paris Chipboard Album 
and MORE!

Cover with ribbons!

Back side of page with laser Eiffel Tower.  Before I attached the Eiffel Tower to the front side of the page I used it as a stencil on the back.  Painted the page pink, then with the laser image on the surface, rubbed ink over it. Then adhered paper to the page that was torn ti outline the shape of the Eiffel tower. Sealed the page with Sakura 3D Crystal Lacquer and Terri Sproul Mixer - Pink Saphire. BlingMaquis Silver Rhinestone Design from Want2Scrap. On the opposite page I adhered images from Retro Cafe Art with Sakura 3D Crystal Lacquer. Embellished with an altered bottle cap with an image of Paris and a few Robin's Nest Dew Drops

Last page of the book... laser cut "PARIS" & Eiffel Tower with Want2Scrap bling swirls cut from Jumbo Flower! Added a bit of Sakura 3D Crystal Lacquer with Terri Sproul Mixer - Pink Saphire.

One more look at the finished book!

Cover of Paris Book 
Click HERE to earlier post with details.

 Page 2 with the laser cut Eiffel Tower. Click HERE to see earlier post with details.

Page 3 with sites of Paris. Click HERE to see earlier post with details using Creative Paperclay®.

Ladies of Paris. Click HERE to see earlier post with details.

Friday, August 17, 2012

August Creative Paperclay® Quick Tip

Today I would like to share my tip for working with Creative Paperclay® and large unmounted stamps.  In this demo I rolled my Creative Paperclay® on a transparency placed of a glass surface.  It is easier to remove the clay from a flexible transparency rather than a stiff glass surface.  Note: A craft sheet would work also.  
In May (HERE) my tip was all about  rolling out Creative Paperclay® it is important to keep the thickness of the clay consistent. To do this I use foam-core board.  I put two or three pieces together for the thickness I desire. Make sure the thickness of the foam-core is deeper than the image on the stamp. 

Once you have the desired size of Creative Paperclay® rolled out gently lay the stamp on the clay. Careful not to press on the stamp before you intend to.  Roll the rolling pin over the entire stamp applying even pressure.

Use a craft knife and slowly cut around the stamped image. 

Once the image is air dried  remove the ruff edges using sandpaper and a emery board.  Check out the detail of the image!


Tools to work with clay (rolling pin, craft knife)

Mark your Calendar for our Blog Hop next month!

Tuesday, August 14, 2012

Just got my FREE copy of RubberStampMadness!

My Masquerade Gorilla 
was published in the 
Fall 2012 Issue

Gorilla and sentiment "A mask - does it hide who you are, or let you BE who you are? Paula Lewis" stamps are from Viva Las Vegastamps! 

I made the mask pop using Sakura 3D Crystal Lacquer!

Check the inside cover for the amazing VLVS! ad art by Sandra Strait and VLVS! bY Mary Vogel Lozinak.

Purchase your copy of RubberStampMadness 
at Viva Las Vegastamps!

Monday, August 13, 2012

VLVS! Stamp-boards in my Clairfontaine Journal

I have always wanted to try my hand at a stamp-board, you may ask what am I referring to? Instead of always having to buy your background papers for your cards and scrapbooking make your own!  
With my awesome journal from Clairfontaine I have been dabbling with stamp-boards.  The 83lb paper is the perfect weight, I have sprayed each page with a mist before stamping and they didn’t buckle!

All pages were misted first, set aside to dry and stamped.  All stamps are from Viva Las Vegastamps! 

Mist: Stewart Superior Memories Mist-Wheat Grass 
Ink:  Tim Holtz Distress Ink Tea Dye

Mist: Stewart Superior Memories Mist-Iridescent 
Ink:  Color Box Fluid Chalk - Rouge

Mist: Stewart Superior Memories Mist-Sparkling Silver
Ink:  CTMH Barn Red (Stamped off)

 Mist: Stewart Superior Memories Mist-Sparkling Silver
Ink:  Tim Holtz Distress Ink Barn Door(Stamped off)

Try making your own stamp boards!

The month of August, twice a week, the VLVS! Design Team is featuring journals entries   in “Carnet de Voyage Travel Album” by Clairefontaine. You can see Clairefontaine products HERE. As part of this month long event, Viva Las Vegastamps! and Clairefontaine are hosting a month long contest--comment on all the Clairefontaine posts on the Viva Las Vegastamps! Blog throughout the month to get a chance at a free journal and a $15 coupon to the VLVS! online store!  You can't win if you don't enter!!! Good Luck!
The next Clairefontaine on the VLVS! Blog will be Friday by Aimee. 

Tuesday, August 7, 2012

Black Lacquer Gift Box!

Why wrap all your gifts in tissue and ribbons?  Make inexpensive Sakura Crystal Lacquer boxes for gift giving! Get started and have your boxes ready for Christmas!  

Wouldn't this be the perfect box to give a piece of jewelry in? Maybe a gift card, tickets to the theatre or a special treasure.  I am sure you can think of more to put in this beautiful box. 

To make this you will need a small unfinished box (from the craft store), black craft paint, Sakura 3D Crystal LacquerTerri Sproul Mixers - Gold, dresden foil, buttons, old jewelry pieces, glass beads.

Paint the box black, carefully paint around the lock and hinges, set aside to dry. Paint a the box with Sakura 3D Crystal Lacquer to give it the black lacquer look.

Mix Terri Sproul Mixers - Gold with the Sakura 3D Crystal Lacquer and paint the top of the box. Let it dry.  

Adhere buttons, beads and jewels to the top of the box with Sakura 3D Crystal Lacquer. 

The final touch for the black lacquer box is a bit of on  dresden foil to the corners of the box.   Now you have a box perfect for gift giving.

Stock up on Sakura 3D Crystal Lacquer & Terri Sproul Mixers for your Christmas crafting projects!!!